Setting a Lexmark Copier to DHCP : Support Helpdesk

Setting a Lexmark Copier to DHCP Print

Modified on: Mon, 30 Oct, 2023 at 10:59 AM

Setting a Lexmark Copier to DHCP

Changing a Lexmark Copier to DHCP (this assumes full access to the device menu and settings)

From the main menu selections, select settings

Next, select Network/Ports > Ethernet

Select IPv4 & select Enable DHCP (turn on)

This will reset the Copier back to DHCP and as long as it is connected to the network should receive a new IP address.

Did you find it helpful? Yes No