3CX Wifi Setup for Fanvil X3W |  |
- Connect the phone to power and wait for it to load up
- On the main screen, press the MENU softkey
- Use the up/down/left/right navigation keys to select the BASIC option on the screen and then press the OK navigation key.
- On the next screen, use the DOWN navigation key until you get to the 8.WLAN option and press the OK Softkey.
- Press the LEFT or RIGHT navigation key until the WLAN changes to “Enabled” and press the OK navigation key. The phone should show “SCANNING” for a few seconds. Once done this will provide extra options on the screen.
- Use the DOWN navigation key to move to 4. Available network and press the OK navigation key
- The phone will search for any wifi networks. Use the UP/DOWN navigation keys to select the name of your wifi network and then press the CONNECT softkey
- Enter your network password using the keypad. Please pay attention to the input mode as this affects which characters are entered. It has a few different modes which are toggled by pressing 123/ABC key
- Once you have entered the password, press the OK key
- Wait a few seconds. If it fails to connect, it will show an error message. If this happens, try entering your password again. If you don’t see any errors, press the RETURN key 3 times to return to the main screen