Trouble Reset Guide 


The attached guide shows how to trouble reset a Konica Minolta 4&8 Series Machines;



  • Open the front door and switch off the device at the main power switch on the bottom left-hand side

  • With the power off, hold the yellow reset button on the main key panel

  • Keeping the reset button held, now turn on the main power switch

  • With the reset button still held, the display should load up saying "trouble reset" (approx 60 seconds)

  • Press this touch screen button and the screen will now display "trouble reset" but will now have OK below it

  • Now turn off at the main switch again, turn back on and close the front door

  • The reset is now complete




7 Series



  • Switch off the device at the main power switch on the right-hand side of the device towards the rear.


  • With the power off, hold the yellow reset button on the main key panel.

  • Keeping the reset button held, now turn on the main power switch.

  • With the reset button still held, the display should load up saying "trouble reset" (approx 60 seconds)

  • Press this touch screen button and the screen will now display "trouble reset" but will now have OK below it.

  • Now turn off at the main switch again, turn back on.

  • The reset is now complete